Archive for the 'shelby gt 500 kr' Category

26
Jul
10

Ford to limit 2011 Shelby GT500 production to 5,500 units

by Chris Paukert (RSS feed) on Jul 15th 2010 at 12:29PM

We’ve just gotten off the horn with Ford‘s SVT performance division, and we’ve learned that the Blue Oval’s hot-rod arm is going to limit production of the 2011 Shelby GT500 to 5,500 units for this model year. According to Ford spokesman Henry Platts, the move is not the result of slow sales, but rather a desire to maintain exclusivity. In fact, sales of Ford’s king of the Mustang range have “exceeded expectations,” with in excess of 3,300 orders already placed.

The 550-horsepower GT500 has not only been performing surprisingly well in a down economy, it’s been going out the door loaded-to-the sills with options. According to Platts, there have been three times as many GT500 coupes ordered with the $1995 glass roof option as compared to the regular Mustang. In the “News That Makes Us Happy” category comes word that a full 68 percent have been spec’d out with the $3,495 performance package (includes 19- and 20-inch painted forged alloys, 3.73 limited-slip, tuned suspension, Gurney flap rear spoiler, etc.), and additionally, 70 percent of all GT500s have been ordered with the $2,340 electronics package (navi, dual-zone HVAC and Sirius/HD radio). With the GT500 starting at an out-the-door price of $49,495 before options, we’re guessing that the GT500 is more than carrying its weight for Dearborn’s bottom line.

While Ford is limiting total output of the GT500 to 5,500 units for 2011, Platts says the automaker has no plans to dictate how that shakes out in the coupe/convertible bodystyle mix. That said, if you’ve been fence-sitting on whether to pick up a GT500 of your very own this year, might we suggest that you make up your mind… quickly.

23
Feb
10

2011 Ford Shelby GT500 Goes Lightweight with Aluminum Engine, Offers Ultimate in Handling

DEARBORN — Ford’s Special Vehicle Team (SVT) engineers are taking high performance to a new level with the 2011 Ford Shelby GT500, resulting in a car that has an all-new aluminum-block engine, even better driving dynamics and handling, improved fuel economy and more horsepower than ever. “The SVT team continues to push the performance standards of the Shelby to even higher levels and better refinement,” said Jost Capito, director of global performance vehicles and motorsports business development. “All the changes we made reflect a desire for even better handling and outstanding driving dynamics – from weight savings to improved balance.”

Weight savings, new technology headline all-new aluminum engine The 2011 Shelby GT500 is powered by an all-new aluminum-block 5.4-liter supercharged V-8 engine, which produces 550 horsepower and 510 ft.-lb. of torque, a 10 horsepower increase versus the 2010 model. The engine also is 102 pounds lighter than its predecessor, delivering a better power-to weight ratio, improved fuel economy, acceleration, handling and steering precision.

“Cutting weight to improve performance is a tradition among hot rodders,” said Carroll Shelby, founder of Shelby American. “It might not be as sexy as adding more horsepower or bigger brakes, but shaving pounds off of a car is the single smartest move you can make.”

The new engine uses state-of-the-art Plasma Transferred Wire Arc (PTWA) liner coating, a process that applies a 150-micron composite coating that contains nanoparticles on the internal surfaces of engine cylinder bores, replacing cast-iron liners typically used in aluminum engine blocks. The Intellectual Property Owners Education Foundation honored the inventors of the Ford-patented PTWA technology with the 2009 National Inventor of the Year Award.

This is the first Ford application of the technology, and it offers improved overall performance and durability, along with functional benefits of reduced friction between piston rings and cylinder bores, improved heat transfer due to increased surface contact area and a weight savings of 8.5 pounds compared to a typical steel-sleeved aluminum block. A mechanical roughening process provides higher material adhesion for the spray coating.

The PTWA process uses air and electricity to create a plasma jet of 35,000 degrees Fahrenheit, which melts a steel wire that is fed into a rotating spray gun. Using atomized air, the melted steel wire is blown into a specially machined surface of the aluminum-block engine cylinder bore. In the process of melting and applying the metal to the surface, the steel wire oxidizes, creating a composite coating consisting of both iron and iron oxide.

Continue reading ’2011 Ford Shelby GT500 Goes Lightweight with Aluminum Engine, Offers Ultimate in Handling’

19
Mar
08

Ford and Shelby to Build 2009 Shelby GT500KR Mustang to Meet Worldwide Demand

To compliment the one-thousand 2008 40th-Anniversary Edition Shelby GT500KR “King of the Road” Mustangs, Ford and Shelby Automobiles will announce that an additional 746 units will be built for the 2009 model year to help meet worldwide demand of the supercar. Of that total, 571 units will be available for U.S. customers thus equaling the 1,571-unit production run of the original Shelby GT500KR. The remainder of the units will be for countries that did not receive 2008 models, including Canada. Like the 40th-Anniversary limited edition, the 2009 Shelby GT500KR will feature a 540-hp 5.4-liter supercharged V-8 with a Ford Racing Power Upgrade Pack, 3.73:1 rear axle ratio, short-throw shifter, and unique suspension tuning.  Exterior design draws inspiration from the classic Shelby KR Mustangs and features unique carbon composite hood, wheels, and unique striping.  The unique 40th Anniversary badging will only be featured on the 2008 special edition.

 




News and Events for the Ford, Lincoln, Mercury owner and enthusiast.





 

September 2010
M T W T F S S
« Aug    
 12345
6789101112
13141516171819
20212223242526
27282930  

Categories